CAT 242B Final Drive (Travel Motor)

Description

The CAT 242B Final Drive is a hydraulic drive motor built to power the chaincase and drive wheels of Caterpillar 242B skid steer loaders. If your 242B is losing traction, pulling to one side, or leaking hydraulic fluid into the chaincase, a replacement CAT 242B drive motor can restore full wheel drive power and steering control. Browse our full range of Caterpillar Final Drive parts for other Cat equipment.

Like other Cat skid steer loaders, the 242B uses a hydraulic drive motor mounted inside a sealed chaincase, where sprockets and roller chains transfer power from the motor to the wheel hubs on each side. The 242B spans two closely related variants, the standard 242B and the 242B II, so confirming your exact machine helps ensure the correct drive motor is supplied.

Common signs you need a CAT 242B final drive replacement:

• The machine drifting or pulling to one side
• One set of wheels moving slower than the other, or not at all
• Loss of traction or reduced drive power
• Hydraulic oil leaking into the chaincase
• Grinding or unusual noise from the chaincase
• Excessive chain wear despite regular adjustment

These symptoms can also point to a worn drive chain, damaged sprockets, low chaincase fluid or a failing charge pump, so it’s worth ruling out the wider chaincase and hydraulic system before replacing the motor itself.

Confirming the Right Fit for Your CAT 242B

Because the 242B spans both the standard and 242B II variants, send us your model, serial number, plus photos of the existing drive motor and hydraulic connections, so Arena Hydraulic and Machinery can confirm the correct fitment before you order. Since both drive motors on a skid steer typically wear at a similar rate, replacing both sides together is often the smarter long-term option.

Why Choose Arena Hydraulic and Machinery

We supply quality aftermarket and reconditioned CAT 242B drive motor units, inspected before dispatch, backed by a 12-month warranty. Arena Hydraulic and Machinery delivers CAT 242B final drives Australia-wide. Contact our team today for pricing, availability or fitment support.

FAQ

Q: Does this final drive fit every CAT 242B skid steer?

A: Not necessarily. The 242B spans both the standard 242B and 242B II variants. The machine model and serial number should be checked before ordering.

Q: Should I replace one drive motor or both?

A: Drive motors on either side typically wear at a similar rate. Replacing both at the same time is often recommended to keep wheel speed even and avoid drifting.

Q: What information is needed to confirm compatibility?

A: Provide the complete model, serial number, clear photos of the existing drive motor and hydraulic connections.